EasyManuals Logo

TP-Link T2600G Series User Manual

TP-Link T2600G Series
1136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #876 background imageLoading...
Page #876 background image
Configuring IPv4 IMPB IPv4 IMPB
User Guide
847
1
IPv4 IMPB
1.1 Overview
IPv4 IMPB (IP-MAC-Port Binding) is used to bind the IP address, MAC address, VLAN ID and
the connected port number of the specified host. Basing on the binding table, the switch
can prevent the ARP cheating attacks with the ARP Detection feature and filter the packets
that don’t match the binding entries with the IP Source Guard feature.
1.2 Supported Features
IP-MAC Binding
This feature is used to add binding entries. The binding entries can be manually configured,
or learned by ARP scanning or DHCP snooping. The features ARP Detection and IPv4
Source Guard are based on the IP-MAC Binding entries.
ARP Detection
In an actual complex network, there are high security risks during ARP implementation
procedure. The cheating attacks against ARP, such as imitating gateway, cheating gateway,
cheating terminal hosts and ARP flooding attack, frequently occur to the network. ARP
Detection can prevent the network from these ARP attacks.
Prevent ARP Cheating Attacks
Based on the IP-MAC Binding entries, the ARP Detection can be configured to detect the
ARP packets and filter the illegal ones so as to prevent the network from ARP cheating
attacks.
Prevent ARP Flooding Attack
You can limit the receiving speed of the legal ARP packets on the port to avoid ARP
flooding attack.
IPv4 Source Guard
IPv4 Source Guard is used to filter the IPv4 packets based on the IP-MAC Binding table.
Only the packets that match the binding rules are forwarded.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link T2600G Series and is the answer not in the manual?

TP-Link T2600G Series Specifications

General IconGeneral
ModelT2600G Series
LayerLayer 2+
TypeManaged
Uplink Ports4 x Gigabit SFP slots
VLAN4K VLANs
QoS8 priority queues
ManagementWeb-based GUI, CLI, SNMP, RMON
Standards and ProtocolsIEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
InterfaceRJ45
L2 FeaturesSTP, RSTP, MSTP, LACP, IGMP Snooping
L3 FeaturesStatic Routing
Security802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table16K
Jumbo Frame9KB
Operating Temperature0°C to 40°C
Storage Temperature-40°C to 70°C
Operating Humidity10% to 90% RH non-condensing
Storage Humidity5% to 90% non-condensing

Related product manuals