Accessing the Switch Command Line Interface Access
User Guide
17
Figure 3-14 Download the Private Key to PuTTY
6) After negotiation is completed, enter the username to log in. If you can log in without
entering the password, the key authentication completed successfully.
Figure 3-15 Log In to the Switch
Note:
The first time you log in, change the password to better protect your network and devices.
3.4 Disable Telnet login
You can shut down the Telnet function to block any Telnet access to the CLI interface.
■ Using the GUI:
Go to
SECURITY > Access Security > Telnet Config, disable the Telnet function and click
Apply.
To Next Page
Loading...
