TP-Link T2600G Series User Manual

User Guide 928
Configuring DHCP Filter Configuration Examples
Verify the DHCPv4 Filter configuration on ports:
Switch_A#show ip dhcp filter interface
Interface state MAC-Verify Limit-Rate Dec-rate LAG
--------- ------- ---------- ---------- -------- ---
Gi1/0/1 Enable Disable Disable Disable N/A
Gi1/0/2 Enable Disable Disable Disable N/A
Gi1/0/3 Enable Disable Disable Disable N/A
Gi1/0/4 Enable Disable Disable Disable N/A
...
Verify the legal DHCPv4 server configuration:
Switch_A#show ip dhcp filter server permit-entry
Server IP Client MAC Interface
---------------- ----------------- ---------
192.168.0.200 all Gi1/0/1
4.2 Example for DHCPv6 Filter
4.2.1 Network Requirements
As shown below, all the DHCPv6 clients get IP addresses from the legal DHCPv6 server,
and any other DHCPv6 server in the LAN is regarded as illegal. Now it is required that only
the legal DHCPv6 server is allowed to assign IP addresses to the clients.

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing