TP-Link T2600G Series User Manual

Configuring QoS Configuration Examples
User Guide
677
2 VoiceVLAN active Gi1/0/1, Gi1/0/2, Gi1/0/4
3 VLAN3 active Gi1/0/3, Gi1/0/4
Verify the Voice VLAN configuration:
Switch_A(config)#show voice vlan interface
Voice VLAN ID 2
Priority 7
Interface Voice VLAN Mode Operational Status LAG
--------- --------------- ------------------ ---
Gi1/0/1 enabled Up N/A
Gi1/0/2 enabled Up N/A
Gi1/0/3 disabled Down N/A
Gi1/0/4 disabled Down N/A
Gi1/0/5 disabled Down N/A
...
Gi1/0/28 disabled Down N/A
6.3 Example for Auto VoIP
6.3.1 Network Requirements
As shown below, the company plans to install IP phones in the office area. IP phones share
switch ports used by computers, because no more ports are available for IP phones. To
ensure the good voice quality, the voice traffic requires a higher priority than the data
traffic.

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing