Configuring IPv4 IMPB IP-MAC Binding Configuration
User Guide
853
Maximum Entries Configure the maximum number of binding entries a port can learn via DHCP
snooping
LAG Displays the LAG that the port is in.
4) The learned entries will be displayed in the Binding Table. You can go to SECURITY >
IPv4 IMPB > IP-MAC Binding > Binding Table to view or edit the entries.
2.1.4 Viewing the Binding Entries
In the Binding Table, you can view, search and edit the specified binding entries.
Choose the menu SECURITY > IPv4 IMPB > IP-MAC Binding > Binding Table to load the
following page.
Figure 2-4 Binding Table
You can specify the search criteria to search your desired entries.
Source Select the source of the entry and click Search.
All: Displays the entries from all sources.
Manual Binding: Displays the manually bound entries.
ARP Scanning: Displays the binding entries learned from ARP Scanning.
DHCP Snooping: Displays the binding entries learned from DHCP Snooping.
IP Enter an IP address and click Search to search the specific entry.
Additionally, you select one or more entries to edit the host name and protect type and
click Apply.
Host Name Enter a host name for identification.
IP Address Displays the IP address.
MAC Address Displays the MAC address.
To Next Page
Loading...
