TP-Link T2600G Series User Manual

User Guide 1090
Diagnosing the Device & Network Appendix: Default Parameters
3
Appendix: Default Parameters
Default settings of Network Diagnostics are listed in the following tables.
Table 3-1 Default Settings of Ping Config
Parameter Default Setting
Destination IP 192.168.0.1
Ping Times 4
Data Size 64 bytes
Interval 1000 milliseconds
Table 3-2 Default Settings of Tracert Config
Parameter Default Setting
Destination IP 192.168.0.100
Maximum Hops 4 hops

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing