TP-Link T2600G Series User Manual

Configuring ARP ARP Configurations
User Guide
607
2
ARP Configurations
With ARP configurations, you can:
■ View dynamic and static ARP entries.
■ Add or delete static ARP entries.
To configure the Gratuitous ARP feature:
■ Configure the Gratuitous ARP globally and set the Gratuitous ARP sending interval
To configure the Proxy ARP feature:
■ Enable Proxy function for VLAN interfaces or routed ports.
To configure the Local Proxy ARP feature:
■ Enable Local Proxy function for VLAN interfaces or routed ports.
2.1 Using the GUI
2.1.1 Viewing the ARP Entries
The ARP table consists of two kinds of ARP entries: dynamic and static.
■ Dynamic Entry: Automatically learned and will be deleted after aging time.
■ Static Entry: Added manually and will be remained unless modified or deleted manually.
Choose the menu L3 FEATURES > ARP > ARP Table > ARP Table to load the following
page.
Figure 2-1 Viewing the ARP Entries
Interface Displays the network interface of an ARP entry.
IP Address Displays the IP address of an ARP entry.
MAC Address Displays the MAC address of an ARP entry.

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing