User Guide 2
About This Guide More Information
Normal Font A constant (several options are enumerated and only one can be
selected).
For example: no bandwidth {all | ingress | egress}
{} Items in braces { } are required.
[] Items in square brackets [ ] are optional.
| Alternative items are grouped in braces and separated by vertical bars |.
For example: speed {10 | 100 | 1000}
Italic Font A variable (an actual value must be assigned).
For example: bridge aging-time aging-time
Common combination:
{[ ][ ][ ]} A least one item in the square brackets must be selected.
For example: bandwidth {[ingress
ingress-rate] [egress egress-
rate]}
This command can be used on three occasions:
bandwidth ingress
ingress-rate
is used to restrict ingress
bandwidth.
bandwidth egress
egress-rate
is used to restrict egress
bandwidth.
bandwidth ingress
ingress-rate
egress
egress-rate
is used to
restrict ingress and egress bandwidth.
More Information
■ The latest software and documentations can be found at Download Center at
https://www.tp-link.com/support.
■ The Installation Guide (IG) can be found where you find this guide or inside the package
of the switch.
■ Specifications can be found on the product page at https://www.tp-link.com.
■ To ask questions, find answers, and communicate with TP-Link users or engineers,
please visit https://community.tp-link.com to join TP-Link Community.
■ Our Technical Support contact information can be found at the Contact Technical
Support page at https://www.tp-link.com/support.
To Next Page
Loading...
