TP-Link T2600G Series User Manual

Appendix: Default Parameters
User Guide
1079
7
Appendix: Default Parameters
Default settings of SNMP are listed in the following tables.
Table 7-1 Default Global Config Settings
Parameter
Default Setting
SNMP Disabled
Local Engine ID Automatically
Remote Engine ID None
Table 7-2 Default SNMP View Table Settings
View Name
View Type MIB Object ID
viewDefault Include 1
viewDefault Exclude 1.3.6.1.6.3.15
viewDefault Exclude 1.3.6.1.6.3.16
viewDefault Exclude 1.3.6.1.6.3.18
Table 7-3 Default SNMP v1/v2c Settings
Parameter Default Setting
Community Entry No entries
Community Name None
Access Read-only
MIB View viewDefault
Table 7-4 Default SNMP v3 Settings
Parameter Default Setting
SNMP Group
Group Entry No entries
Group Name None
Security Model v3
Security Level NoAuthNoPriv
Read View viewDefault
Write View None
Notify View
None

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing