TP-Link T2600G Series User Manual

Managing MAC Address Table Appendix: Default Parameters
User Guide
165
5
Appendix: Default Parameters
Default settings of the MAC Address Table are listed in the following tables.
Table 5-1 Entries in the MAC Address Table
Parameter Default Setting
Static Address Entries None
Dynamic Address Entries Auto-learning
Filtering Address Entries None
Table 5-2 Default Settings of Dynamic Address Table
Parameter Default Setting
Auto Aging Enabled
Aging Time 300 seconds
Table 5-3 Default Settings of MAC Notification
Parameter Default Setting
Global Status Disabled
Table Full Notification Disabled
Notification Interval 1 Second
Learned Mode Change
Notification
Disabled
Exceed Max Learned
Notification
Disabled
New MAC Learned Notification Disabled

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing