Configuring Access Security Appendix: Default Parameters
User Guide
717
3
Appendix: Default Parameters
Default settings of Access Security are listed in the following tables.
Table 3-1 Default Settings of Access Control Configuration
Parameter Default Setting
Access Control Disabled
Table 3-2 Default Settings of HTTP Configuration
Parameter Default Setting
HTTP Enabled
Port 80
Session Timeout 10 minutes
Number Control Disabled
Table 3-3 Default Settings of HTTPS Configuration
Parameter Default Setting
HTTPS Enabled
Protocol Version All
Port 443
RSA_WITH_RC4_128_MD5 Enabled
RSA_WITH_RC4_128_SHA Enabled
RSA_WITH_DES_CBC_SHA Enabled
RSA_WITH_3DES_EDE_CBC_
SHA
Enabled
ECDHE_WITH_AES_128_GCM_
SHA256
Enabled
ECDHE_WITH_AES_256_GCM_
SHA384
Enabled
Session Timeout 10 minutes
Number Control Disabled
Table 3-4 Default Settings of SSH Configuration
Parameter Default Setting
SSH Disabled
Protocol V1 Enabled
Protocol V2 Enabled
To Next Page
Loading...
