TP-Link T2600G Series User Manual

Configuring Access Security Access Security
User Guide
695
1
Access Security
1.1 Overview
Access Security provides different security measures for accessing the switch remotely
so as to enhance the configuration management security.
1.2 Supported Features
Access Control
This function is used to control the users’ access to the switch based on IP address, MAC
address or port.
HTTP
This function is based on the HTTP protocol. It can allow or deny users to access the switch
via a web browser.
HTTPS
This function is based on the SSL or TLS protocol working in transport layer. It supports a
security access via a web browser.
SSH
This function is based on the SSH protocol, a security protocol established on application
and transport layers. The function with SSH is similar to a telnet connection, but SSH can
provide information security and powerful authentication.
Telnet
This function is based on the Telnet protocol subjected to TCP/IP protocol. Through Telnet,
users can log on to the switch remotely.
Serial Port
You can configure the serial port parameters.

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing