TP-Link T2600G Series User Manual

Configuring Layer 2 Multicast Viewing Multicast Snooping Information
User Guide
353
6.1.4 Viewing IPv6 Multicast Statistics on Each Port
Choose the menu L2 FEATURES > Multicast > Multicast Info > IPv6 Multicast Statistics
to load the following page:
Figure 6-4 IPv6 Multicast Statistics
Follow these steps to view IPv6 multicast statistics on each port:
1) To get the real-time IPv6 multicast statistics, enable Auto Refresh, or click Refresh.
Auto Refresh Enable or disable Auto Refresh. When enabled, the switch will automatically
refresh the multicast statistics.
Refresh Interval After Auto Refresh is enabled, specify the time interval for the switch to refresh
the multicast statistics.
2) In the Port Statistics section, view IPv6 multicast statistics on each port.
Query Packets Displays the number of query packets received by the port.
Report Packets
(v1)
Displays the number of MLDv1 packets received by the port.
Report Packets
(v2)
Displays the number of MLDv2 packets received by the port.

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing