TP-Link T2600G Series User Manual

Configuring sFlow (Only for Certain Devices) Appendix: Default Parameters
User Guide
973
4
Appendix: Default Parameters
Default settings of maintenance are listed in the following tables.
Table 4-1 Default Settings of sFlow
Parameter Default Setting
sFlow Agent
sFlow Agent Disabled
Agent Address 0.0.0.0
sFlow Version 5
sFlow Collector
Collector IP 0.0.0.0
Collector Port 6343
Maximum Datagram Size 300 bytes
Timeout (s) 0
sFlow Sampler
Collector ID 0, indicates sampling feature is disabled on the port.
Ingress Sampling Rate (Hz) 0
Egress Sampling Rate (Hz) 0
Maximum Header Size
(Bytes)
128

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing