TP-Link T2600G Series - Configuring 802.1 x Globally

Configuring 802.1x 802.1x Configuration
User Guide
759
Switch#configure
Switch(config)#radius-server host 192.168.0.100 auth-port 1812 acct-port 1813 key
123456
Switch(config)#aaa group radius radius1
Switch(aaa-group)#server 192.168.0.100
Switch(aaa-group)#exit
Switch(config)#aaa authentication dot1x default radius1
Switch(config)#aaa accounting dot1x default radius1
Switch(config)#show radius-server
Server Ip Auth Port Acct Port Timeout Retransmit NAS Identifier
Shared key
192.168.0.100 1812 1813 5 2 000AEB132397 123456
Switch(config)#show aaa group radius1
192.168.0.100
Switch(config)#show aaa authentication dot1x
Methodlist pri1 pri2 pri3 pri4
default radius1 -- -- --
Switch(config)#show aaa accounting dot1x
Methodlist pri1 pri2 pri3 pri4
default radius1 -- -- --
Switch(config)#end
Switch#copy running-config startup-config
2.2.2 Configuring 802.1x Globally
Follow these steps to configure 802.1x globally:
Step 1 configure
Enter global configuration mode.
Step 2 dot1x system-auth-control
Enable 802.1x authentication globally.