TP-Link T2600G Series - Appendix: Default Parameters

Configuring ACL Appendix: Default Parameters
User Guide
843
4
Appendix: Default Parameters
The default settings of ACL are listed in the following tables:
Table 4-1 MAC ACL
Parameter Default Setting
Operation Permit
User Priority No Limit
Time-Range No Limit
Table 4-2 IP ACL
Parameter Default Setting
Operation Permit
IP Protocol All
DSCP No Limit
IP ToS No Limit
IP Pre No Limit
Time-Range No Limit
Table 4-3 IPv6 ACL
Parameter Default Setting
Operation Permit
Time-Range No Limit
Table 4-4 Combined ACL
Parameter Default Setting
Operation Permit
Time-Range No Limit