TP-Link T2600G Series - Appendix: Default Parameters

User Guide 84
Managing System Appendix: Default Parameters
10
Appendix: Default Parameters
Default settings of System Info are listed in the following tables.
Table 10-1 Default Settings of Device Description Configuration
Parameter Default Setting
Device Name The model name
of the switch.
Device Location SHENZHEN
System Contact www.tp-link.com
Table 10-2 Default Settings of System Time Configuration
Parameter Default Setting
Time Source Manual
Table 10-3 Default Settings of Daylight Saving Time Configuration
Parameter Default Setting
DST status Disabled
Default settings of User Management are listed in the following table.
Table 10-4 Default Settings of User Configuration
Parameter Default Setting
User Name admin
Password admin
Access Level Admin
Default settings of System Tools are listed in the following table.
Table 10-5 Default Settings of Boot Configuration
Parameter Default Setting
Current Startup Image image1.bin
Next Startup Image image1.bin
Backup Image image2.bin
Current Startup Config config1.cfg
Next Startup Config config1.cfg