TP-Link T2600G Series User Manual

User Guide 944
Monitoring the System Monitoring the Memory
3
Monitoring the Memory
3.1 Using the GUI
Choose the menu MAINTENANCE > System Monitor > Memory Monitor to load the
following page.
Figure 3-1 Monitoing the Memory
Click Monitor to enable the switch to monitor and display its memory utilization rate every
five seconds.
3.2 Using the CLI
On privileged EXEC mode or any other configuration mode, you can use the following
command to view the memory utilization:
show memory-utilization
View the current memory utilization of the switch.
The following example shows how to monitor the memory:
Switch#show memory-utilization

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing