TP-Link T2600G Series User Manual

Configuring 802.1x Appendix: Default Parameters
User Guide
771
4
Appendix: Default Parameters
Default settings of 802.1x are listed in the following table.
Table 4-1 Default Settings of 802.1x
Parameter Default Setting
Global Config
802.1x Authentication Disabled
Authentication Method EAP
Handshake Enabled
Accounting Disabled
VLAN Assignment Disabled
Port Config
802.1x Status Disabled
MAB Disabled
Guest VLAN Disabled
Port Control Auto
Guest VLAN 0
Maximum Request 3
Quiet Period 10 seconds
Supplicant Timeout 30 seconds
Port Method MAC Based
Dot1X List
Authentication Dot1x
Method List
List Name: default
Pri1: radius
Accounting Dot1x Method
List
List Name: default
Pri1: radius

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing