TP-Link T2600G Series User Manual

Configuring System Logs System Logs Configurations
User Guide
1093
2
System Logs Configurations
System logs configurations include:
■ Configure the local logs.
■ Configure the remote logs.
■ Backing up the logs.
■ Viewing the log table.
Configuration Guidelines
Logs are classified into the following eight levels. Messages of levels 0 to 4 mean the
functionality of the switch is affected. Please take actions according to the log message.
Table 2-1 Levels of Logs
Severity Level Description Example
Emergencies 0 The system is unusable and you have
to reboot the switch.
Software malfunctions affect the
functionality of the switch.
Alerts 1 Actions must be taken immediately. The memory utilization reaches the
limit.
Critical 2 Cause analysis or actions must be
taken immediately.
The memory utilization reaches the
warning threshold.
Errors 3 Error operations or unusual
processing that will not affect
subsequent operations but that
should be noted and analyzed.
Wrong command or password is
entered.
Warnings 4 Conditions that may cause process
failure and that should be noted.
Error protocol packets are
detected.
Notifications 5 Normal but significant conditions. The shutdown command is applied
to a port.
Informational 6 Normal messages for your
information.
The display command is used.
Debugging 7 Debug-level messages that you can
ignore.
General operational information.

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing