EasyManuals Logo

TP-Link T2600G Series User Manual

TP-Link T2600G Series
1136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1085 background imageLoading...
Page #1085 background image
User Guide 1056
RMON Configurations
Status Set the entry as Valid or Under Creation. By default, it is Valid. The switch start
to collect Ethernet statistics for a Statistics entry since the entry status is
configured as valid.
Valid: The entry is created and valid.
Under Creation: The entry is created but invalid.
2) Click Create.
5.1.2 Configuring History Group
Choose the menu MAINTENANCE > SNMP > RMON > History to load the following page.
Figure 5-2 Configuring the History Entry
Follow these steps to configure the History group:
1) Select a History entry, and specify a port to be monitored.
Index Displays the index of History entries. The switch supports up to 12 History
entries.
Port Specify a port to be monitored.
2) Set the sample interval and the maximum buckets of History entries.
Interval (seconds) Specify the number of seconds in each polling cycle. Valid values are from
10 to 3600 seconds. Every history entry has its own timer. For the monitored
port, the switch samples packet information and generates a record in every
interval.
Maximum Buckets Set the maximum number of records for the History entry. Valid values are
from 10 to 130. When the number of records exceeds the limit, the earliest
record will be overwritten.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link T2600G Series and is the answer not in the manual?

TP-Link T2600G Series Specifications

General IconGeneral
ModelT2600G Series
LayerLayer 2+
TypeManaged
Uplink Ports4 x Gigabit SFP slots
VLAN4K VLANs
QoS8 priority queues
ManagementWeb-based GUI, CLI, SNMP, RMON
Standards and ProtocolsIEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
InterfaceRJ45
L2 FeaturesSTP, RSTP, MSTP, LACP, IGMP Snooping
L3 FeaturesStatic Routing
Security802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table16K
Jumbo Frame9KB
Operating Temperature0°C to 40°C
Storage Temperature-40°C to 70°C
Operating Humidity10% to 90% RH non-condensing
Storage Humidity5% to 90% non-condensing

Related product manuals