TP-Link T2600G Series - Appendix: Default Parameters

User Guide 932
Configuring DHCP Filter Appendix: Default Parameters
5
Appendix: Default Parameters
Default settings of DHCPv4 Filter are listed in the following table:
Table 5-1 DHCPv4 Filter
Parameter Default Setting
Global Config
DHCPv4 Filter Disabled
Port Config
Status Disabled
MAC Verify Disabled
Rate Limit Disabled
Decline Protect Disabled
Table 5-2 DHCPv6 Filter
Parameter Default Setting
Global Config
DHCPv6 Filter Disabled
Port Config
Status Disabled
Rate Limit Disabled
Decline Protect Disabled