TP-Link T2600G Series User Manual

Configuring LLDP LLDP-MED Configurations
User Guide
457
Civic Address Configure the address of the audio device in the IETF defined address format.
What: Specify the role type of the local device, DHCP Server, Switch or LLDP-MED
Endpoint.
Country Code: Enter the country code defined by ISO 3166 , for example, CN, US.
Language, Province/State etc.: Enter the regular details.
3.2 Using the CLI
3.2.1 Global Config
Step 1 configure
Enter global configuration mode.
Step 2 lldp
Enable the LLDP feature on the switch.
Step 3 lldp med-fast-count
count
(Optional) Specify the number of successive LLDP-MED frames that the local device
sends when fast start mechanism is activated. When the fast start mechanism is activated,
the local device will send the specified number of LLDP packets carrying LLDP-MED
information.
count: The valid value are from 1 to 10. The default is 4.
Step 4 show lldp
Display the LLDP information.
Step 5 end
Return to Privileged EXEC Mode.
Step 6 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to configure LLDP-MED fast count as 4:
Switch#configure
Switch(config)#lldp
Switch(config)#lldp med-fast-count 4
Switch(config)#show lldp
LLDP Status: Enabled
Tx Interval: 30 seconds

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing