EasyManuals Logo

TP-Link T2600G Series User Manual

TP-Link T2600G Series
1136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #756 background imageLoading...
Page #756 background image
Configuring AAA AAA Configuration
User Guide
727
2.1.5 Configuring Login Account and Enable Password
The login account and Enable password can be configured locally on the switch or centrally
on the RADIUS/TACACS+ server(s).
On the Switch
The local username and password for login can be configured in the User Management
feature. For details, refer to Managing System.
To configure the local Enable password for getting administrative privileges, choose the
menu SECURITY > AAA > Global Config to load the following page.
Figure 2-8 Configure Enable Password
There are two options: Clear Password and Set Password. You can choose whether the
local Enable password is required when the guests try to get administrative privileges.
Click Apply.
Tips:
The logged-in guests can enter the local Enable password on this page to get
administrative privileges.
On the Server
The accounts created by the RADIUS/TACACS+ server can only view the configurations
and some network information without the Enable password.
Some configuration principles on the server are as follows:
For Login authentication configuration, more than one login account can be created on
the server. Besides, both the user name and password can be customized.
For Enable password configuration:
On RADIUS server, the user name should be set as $enable$, and the Enable password
is customizable. All the users trying to get administrative privileges share this Enable
password.
On TACACS+ server, configure the value of “enable 15“ as the Enable password in the
configuration file. All the users trying to get administrative privileges share this Enable
password.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link T2600G Series and is the answer not in the manual?

TP-Link T2600G Series Specifications

General IconGeneral
ModelT2600G Series
LayerLayer 2+
TypeManaged
Uplink Ports4 x Gigabit SFP slots
VLAN4K VLANs
QoS8 priority queues
ManagementWeb-based GUI, CLI, SNMP, RMON
Standards and ProtocolsIEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
InterfaceRJ45
L2 FeaturesSTP, RSTP, MSTP, LACP, IGMP Snooping
L3 FeaturesStatic Routing
Security802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table16K
Jumbo Frame9KB
Operating Temperature0°C to 40°C
Storage Temperature-40°C to 70°C
Operating Humidity10% to 90% RH non-condensing
Storage Humidity5% to 90% non-condensing

Related product manuals