TP-Link T2600G Series User Manual

Configuring AAA AAA Configuration
User Guide
737
Module Login List Enable List
Console default default
Telnet default default
Ssh default default
Http Login1 Enable1
Switch(config)#end
Switch#copy running-config startup-config
2.2.5 Configuring Login Account and Enable Password
The login account and Enable password can be configured locally on the switch or centrally
on the RADIUS/TACACS+ server(s).
■ On the Switch
The local username and password for login can be configured in the User Management
feature. For details, refer to Managing System.
To configure the local Enable password for getting administrative privileges, follow these
steps:
Step 1 configure
Enter global configuration mode.

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing