TP-Link T2600G Series User Manual

User Guide 920
Configuring DHCP Filter DHCPv6 Filter Configuration
3
DHCPv6 Filter Configuration
To complete DHCPv6 Filter configuration, follow these steps:
1) Configure the basic DHCPv6 Filter parameters.
2) Configure legal DHCPv6 servers.
3.1 Using the GUI
3.1.1 Configuring the Basic DHCPv6 Filter Parameters
Choose the menu SECURITY > DHCP Filter > DHCPv6 Filter > Basic Config to load the
following page.
Figure 3-1 DHCPv6 Filter Basic Config
Follow these steps to complete the basic settings of DHCPv6 Filter:
1) In the Global Config section, enable DHCPv6 globally.
2) In the Port Config section, select one or more ports and configure the related
parameters.
Port Displays the port number.

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing