Configuring OAM Viewing OAM Statistics
User Guide
1003
3.2.2 Viewing Event Logs
On privileged EXEC mode or any other configuration mode, you can use the following
command to view the local and remote event logs on the specified port.
show ethernet-oam event-log [ interface fastEthernet {
port
|
port-list
} |
interface gigabitEthernet {
port
|
port-list
} | ten-gigabitEthernet {
port
|
port-list
}]
View the local and remote event logs on the specified port.
An event list will be displayed, including the following information:
Type: Displays the type of the link event.
Location: Displays the location where the link event occurred (local or remote).
Timestamp: Displays the time reference when the link event occurred.
And the number of local and remote event logs will be displayed, including the following events:
Error Symbol Event: Displays the number of error symbol period link events that have occurred on the
local link or remote link.
Error Frame Event: Displays the number of error frame link events that have occurred on the local link or
remote link.
Error Frame Period Event: Displays the number of error frame period link events that have occurred on
the local link or remote link.
Error Frame Seconds Event: Displays the number of error frame seconds link events that have occurred
on the local link or remote link.
Dying Gasp: Displays the number of Dying Gasp link events that have occurred on the local link or remote
link.
Critical Event: Displays the number of Critical Event link events that have occurred on the local link or
remote link.
The following example shows how to view the event logs on port 1/0/1.
Switch#show ethernet-oam event-log interface gigabitEthernet 1/0/1
Gi1/0/1
Event Listing
-----------------------------------------------------------
Type Location Time Stamp
--------------------- ------------- --------------------
Critical Event Remote 2016-01-01 08:08:00
Local Event Statistics
Error Symbol Event : 0
To Next Page
Loading...
Need help?
General
