TP-Link T2600G Series - Default Parameters for MLD Snooping

User Guide 380
Configuring Layer 2 Multicast Appendix: Default Parameters
Function Parameter Default Setting
Static Multicast Group
Settings
Static Multicast Group Entries None
IGMP Accounting and
Authentication
IGMP Accounting Disabled
IGMP Authentication Disabled
8.2 Default Parameters for MLD Snooping
Table 8-2 Default Parameters of MLD Snooping
Function Parameter Default Setting
Global Settings of IGMP
Snooping
MLD Snooping Disabled
Unknown Multicast Groups Forward
MLD Snooping Settings in the
VLAN
MLD Snooping Disabled
Fast Leave Disabled
Report Suppression Disabled
Member Port Aging Time 260 seconds
Router Port Aging Time 300 seconds
Leave Time 1 second
MLD Snooping Querier Disabled
Query Interval 60 seconds
Maximum Response Time 10 seconds
Last Listener Query Interval 1 second
Last Listener Query Count 2
General Query Source IP ::
Static Router Ports None
Forbidden Router Ports None
MLD Snooping Settings on
the Port and LAG
MLD Snooping Enabled
Fast Leave Disabled