TP-Link T2600G Series User Manual

Configuring IPv6 IMPB IPv6-MAC Binding Configuration
User Guide
885
2) In the VLAN Config section, select one or more VLANs and enable ND Snooping. Click
Apply.
VLAN ID Displays the VLAN ID.
Status Enable or disable ND Snooping on the VLAN.
3) In the Port Config section, configure the maximum number of entries a port can learn
via ND snooping. Click Apply.
Port Displays the port number.
Maximum Entries Configure the maximum number of binding entries a port can learn via ND
snooping.
LAG Displays the LAG that the port is in.
4) The learned entries will be displayed in the Binding Table. You can go to SECURITY >
IPv6 IMPB > IPv6-MAC Binding > Binding Table to view or edit the entries.
2.1.3 Binding Entries via DHCPv6 Snooping
With DHCPv6 Snooping enabled, the switch can monitor the IP address obtaining process
of the host, and record the IPv6 address, MAC address, VLAN ID and the connected port
number of the host.

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing