TP-Link T2600G Series User Manual

User Guide 886
Configuring IPv6 IMPB IPv6-MAC Binding Configuration
Choose the menu SECURITY > IPv6 IMPB > IPv6-MAC Binding > DHCPv6 Snooping to
load the following page.
Figure 2-3 DHCPv6 Snooping
Follow these steps to configure IPv6-MAC Binding via DHCPv6 Snooping:
1) In the Global Config section, globally enable DHCPv6 Snooping. Click Apply.
2) In the VLAN Config section, enable DHCPv6 Snooping on a VLAN or range of VLANs.
Click Apply.
VLAN ID Displays the VLAN ID.
Status Enable or disable DHCPv6 Snooping on the VLAN.
3) In the Port Config section, configure the maximum number of binding entries a port can
learn via DHCPv6 snooping. Click Apply.
Port Displays the port number.

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing