TP-Link T2600G Series User Manual

User Guide 916
Configuring DHCP Filter DHCPv4 Filter Configuration
2.1.2 Configuring Legal DHCPv4 Servers
Choose the menu SECURITY > DHCP Filter > DHCPv4 Filter > Legal DHCPv4 Servers and
click
to load the following page.
Figure 2-2 Adding Legal DHCPv4 Server
Follow these steps to add a legal DHCPv4 server:
1) Configure the following parameters:
Server IP Address Specify the IP address of the legal DHCPv4 server.
Client MAC
Address
(Optional) Specify the MAC address of the DHCP Client. You can also keep this
field empty, which represents for all DHCP clients.
Server Port Select the port that the legal DHCPv4 server is connected.
2) Click Create.
2.2 Using the CLI
2.2.1 Configuring the Basic DHCPv4 Filter Parameters
Follow these steps to complete the basic settings of DHCPv4 Filter:
Step 1 configure
Enter global configuration mode.

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing