TP-Link T2600G Series User Manual

User Guide 746
Configuring AAA Appendix: Default Parameters
4
Appendix: Default Parameters
Default settings of AAA are listed in the following tables.
Table 4-1 AAA
Parameter Default Setting
Global Config
AAA Feature Enabled
RADIUS Config
Server IP None
Shared Key None
Auth Port 1812
Acct Port 1813
Retransmit 2
Timeout 5 seconds
NAS Identifier The MAC address of the switch.
TACACS+ Config
Server IP None
Timeout 5 seconds
Shared Key None
Port 49
Server Group: There are two default server groups: radius and
tacacs.
Method List
Authentication Login
Method List
List name: default
Pri1: local
Authentication Enable
Method List
List name: default
Pri1: none

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing