TP-Link T2600G Series User Manual

User Guide 202
Configuring Protocol VLAN Protocol VLAN Configuration
2
Protocol VLAN Configuration
To complete protocol VLAN configuration, follow these steps:
1) Configure 802.1Q VLAN.
2) Create protocol template.
3) Configure Protocol VLAN.
Configuration Guidelines
■ You can use the IP, ARP, RARP, and other protocol templates provided by TP-Link
switches, or create new protocol templates.
■ In a protocol VLAN, when a port receives an untagged data packet, the switch will first
search for the protocol VLAN matching the protocol type value of the packet. (If MAC
VLAN is also configured, the switch will first process MAC VLAN.) If there is a match, the
switch will insert the corresponding VLAN tag to the data packet and forward it within
the VLAN. Otherwise, the switch will forward the data packet to the default VLAN based
on the PVID (Port VLAN ID) of the receiving port. When the port receives a tagged data
packet, the switch will directly process the data packet according to the processing
rule of the 802.1 Q VLAN.
2.1 Using the GUI
2.1.1 Configuring 802.1Q VLAN
Before configuring protocol VLAN, create an 802.1Q VLAN and set the port type according
to network requirements. For details, refer to Configuring 802.1Q VLAN.

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing