TP-Link T2600G Series User Manual

User Guide 726
Configuring AAA AAA Configuration
Pri1- Pri4 Specify the authentication methods in order. The method with priority 1
authenticates a user first, the method with priority 2 is tried if the previous
method does not respond, and so on.
local: Use the local database in the switch for authentication.
none: No authentication is used.
radius: Use the remote RADIUS server/server groups for authentication.
tacacs: Use the remote TACACS+ server/server groups for authentication.
Other user-defined server groups: Use the user-defined server groups for
authentication.
2) Click Create to add the new method.
2.1.4 Configuring the AAA Application List
Choose the menu SECURITY > AAA > Global Config to load the following page.
Figure 2-7 Configure Application List
Follow these steps to configure the AAA application list.
1) In the AAA Application List section, select an access application and configure the
Login list and Enable list.
Module Displays the configurable applications on the switch: console, telnet, ssh and
http.
Login List Select a previously configured Login method list. This method list will
authenticate the users trying to log in to the switch.
Enable List Select a previously configured Enable method list. This method list will
authenticate the users trying to get administrative privileges.
2) Click Apply.

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing