TP-Link T2600G Series User Manual

Configuring AAA AAA Configuration
User Guide
725
Choose the menu SECURITY > AAA > Method Config to load the following page.
Figure 2-5 Method List
There are two default methods respectively for the Login authentication and the Enable
authentication.
You can edit the default methods or follow these steps to add a new method:
1) Click
in the Authentication Login Method Config section or Authentication
Enable Method Config section to add corresponding type of method list. The following
window will pop up.
Figure 2-6 Add New Method
Configure the parameters for the method to be added.
Method List Name Specify a name for the method.

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing