TP-Link T2600G Series User Manual

Managing System Appendix: Default Parameters
User Guide
85
Parameter Default Setting
Backup Config config2.cfg
Default setting of EEE is listed in the following table.
Table 10-6 Default Settings of EEE Configuration
Parameter Default Setting
Status Disabled
(For T2600G-28MPS) Default settings of PoE is listed in the following table.
Table 10-7 Default Settings of PoE Configuration
Parameter Default Setting
PoE Config
System Power Limit 384.0W
Port Config
PoE Status Enabled
PoE Priority Low
Power Limit (0.1w-30.0w) Class 4
Time Range No Limit
PoE Profile None
Profile Config
Profile Name None
PoE Status Enabled
PoE Priority Low
Power Limit Auto
Default settings of SDM Template are listed in the following table.
Table 10-8 Default Settings of SDM Template Configuration
Parameter Default Setting
Current Template ID Default
Next Template ID Default

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing