TP-Link T2600G Series User Manual

User Guide 1080
Appendix: Default Parameters
Parameter Default Setting
SNMP User
User Entry
No entries
User Name
None
User Type
Local User
Group Name
None
Security Model
v3
Security Level
noAuthNoPriv
Authentication
Mode
MD5 (when Security Level is configured as AuthNoPriv
or AuthPriv)
Authentication
Password
None
Privacy Mode
DES (when Security Level is configured as AuthPriv)
Privacy Password
None
Default settings of Notification are listed in the following table.
Table 7-5 Default Notification Settings
Parameter Default Setting
Notification Config
Notification Entry No entries
IP Mode IPv4
IP Address None
UDP Port 162
User None
Security Model v1
Security Level noAuthNoPriv
Type Trap
Retry None
Timeout None
Trap Config
Enabled SNMP
Traps
SNMP Authentication, Coldstart, Warmstart, Link
Status

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing