TP-Link T2600G Series User Manual

Appendix: Default Parameters
User Guide
1081
Default settings of RMON are listed in the following tables.
Table 7-6 Default Statistics Config Settings
Parameter Default Setting
Statistics Entry No entries
ID None
Port None
Owner None
IP Mode Valid
Table 7-7 Default Settings for History Entries
Parameter Default Setting
Port 1/0/1
Interval 1800 seconds
Max Buckets 50
Owner monitor
Status Disabled
Table 7-8 Default Settings for Event Entries
Parameter Default Setting
User public
Description None
Type None
Owner monitor
Status Disabled
Table 7-9 Default Settings for Alarm Entries
Parameter Default Setting
Variable RecBytes
Statistics 0, means no Statistics entry is selected.
Sample Type Absolute
Rising Threshold 100
Rising Event 0, means no event is selected.
Falling Threshold 100
Falling Event 0, means no event is selected.
Alarm Type All

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing