EasyManuals Logo

TP-Link T2600G Series User Manual

TP-Link T2600G Series
1136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1014 background imageLoading...
Page #1014 background image
Configuring OAM Ethernet OAM Configurations
User Guide
985
Maximum
OAMPDU
Displays the maximum size of OAMPDU.
Remote
Loopback
Displays whether the local entity supports Remote Loopback.
Unidirection Displays whether the local entity supports Unidirection.
Link Monitoring Displays whether the local entity supports Link Monitoring.
Variable Request Displays whether the local entity supports Variable Request.
PDU Revision Displays the PDU Revision of the local entity.
Operation Status Displays the status of OAM connection:
Disable: OAM is disabled on the port.
LinkFault: The link between the local entity and the remote entity is down.
PassiveWait: The port is in passive mode and is waiting to see if the peer device is
OAM capable.
ActiveSendLocal: The port is in active mode and is sending local information.
SendLocalAndRemote: The local port has discovered the peer but has not yet
accepted or rejected the configuration of the peer.
SendLocalAndRemoteOK: The local device agrees the OAM peer entity.
PeeringLocallyRejected: The local OAM entity rejects the remote peer OAM entity.
PeeringRemotelyRejected: The remote OAM entity rejects the local device.
NonOperHalfDuplex: Ethernet OAM is enabled but the port is in half-duplex
operation. You should configure the port as a full-duplex port.
Operational: OAM connection is established with the peer and OAM works normally.
Loopback Status Displays the loopback status.
No Loopback: Neither the local entity nor the remote entity is in the loopback mode.
Local Loopback: The local entity is in the loopback mode.
Remote Loopback: The remote entity is in the loopback mode.
The OAM information of the remote entity is as follows:
Mode Displays the OAM mode of the remote entity.
MAC Address Displays the MAC address of the remote entity.
Vendor (OUI) Displays the Vendor’s OUI of the remote entity.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link T2600G Series and is the answer not in the manual?

TP-Link T2600G Series Specifications

General IconGeneral
ModelT2600G Series
LayerLayer 2+
TypeManaged
Uplink Ports4 x Gigabit SFP slots
VLAN4K VLANs
QoS8 priority queues
ManagementWeb-based GUI, CLI, SNMP, RMON
Standards and ProtocolsIEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
InterfaceRJ45
L2 FeaturesSTP, RSTP, MSTP, LACP, IGMP Snooping
L3 FeaturesStatic Routing
Security802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table16K
Jumbo Frame9KB
Operating Temperature0°C to 40°C
Storage Temperature-40°C to 70°C
Operating Humidity10% to 90% RH non-condensing
Storage Humidity5% to 90% non-condensing

Related product manuals