EasyManuals Logo

TP-Link T2600G Series User Manual

TP-Link T2600G Series
1136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1053 background imageLoading...
Page #1053 background image
User Guide 1024
SNMP
RFC2620-RADIUS-Acc-Client.mib
RFC2674-pBridge.mib
RFC2674-qBridge.mib
RFC2863-pBridge.mib
RFC2925-Disman-Ping.mib
RFC2925-Disman-Traceroute.mib
For detail information about the supported public MIBs, see Supported Public MIBs for TP-
Link Switches.
SNMP Entity
An SNMP entity is a device running the SNMP protocol. Both the SNMP manager and SNMP
agent are SNMP entities.
SNMP Engine
An SNMP engine is a part of the SNMP entity. Every SNMP entity has one and only
one engine. An SNMP engine provides services for sending and receiving messages,
authenticating and encrypting messages, and controlling access to managed objects.
An SNMP engine can be uniquely identified by an engine ID within an administrative domain.
Since there is a one-to-one association between SNMP engines and SNMP entities, we
can also use the engine ID to uniquely identify the SNMP entity within that administrative
domain.
Notification Types
Notifications are messages that the switch sends to the NMS host when important events
occur. Notifications facilitate the monitoring and management of the NMS. There are two
types of notifications:
Trap: When the NMS host receives a Trap message, it will not send a response to
the switch. Thus the switch cannot tell whether a message is received or not, and the
messages that are not received will not be resent.
Inform: When the NMS host receives an Inform message, it sends a response to the
switch. If the switch does not receive any response within the timeout interval, it will
resend the Inform message. Therefore, Inform is more reliable than Trap.
SNMP Version
The device supports three SNMP versions with the security level from low to high: SNMPv1,
SNMPv2c and SNMPv3. Table 1-1 lists features supported by different SNMP versions, and
Table 1-2 shows corresponding application scenarios.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link T2600G Series and is the answer not in the manual?

TP-Link T2600G Series Specifications

General IconGeneral
ModelT2600G Series
LayerLayer 2+
TypeManaged
Uplink Ports4 x Gigabit SFP slots
VLAN4K VLANs
QoS8 priority queues
ManagementWeb-based GUI, CLI, SNMP, RMON
Standards and ProtocolsIEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
InterfaceRJ45
L2 FeaturesSTP, RSTP, MSTP, LACP, IGMP Snooping
L3 FeaturesStatic Routing
Security802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table16K
Jumbo Frame9KB
Operating Temperature0°C to 40°C
Storage Temperature-40°C to 70°C
Operating Humidity10% to 90% RH non-condensing
Storage Humidity5% to 90% non-condensing

Related product manuals