User Guide 402
Configuring Spanning Tree STP/RSTP Configurations
Switch(config)#show spanning-tree active
Spanning tree is enabled
Spanning-tree’s mode: RSTP (802.1w Rapid Spanning Tree Protocol)
Latest topology change time: 2006-01-02 10:04:02
Root Bridge
Priority : 32768
Address : 00-0a-eb-13-12-ba
Local bridge is the root bridge
Designated Bridge
Priority : 32768
Address : 00-0a-eb-13-12-ba
Local Bridge
Priority : 32768
Address : 00-0a-eb-13-12-ba
Interface State Prio Ext-Cost Int-Cost Edge P2p Mode
--------- -------- ---- -------- -------- ---- --------- -----
Gi1/0/16 Enable 128 200000 200000 No Yes(auto) Rstp
Gi1/0/18 Enable 128 200000 200000 No Yes(auto) Rstp
Gi1/0/20 Enable 128 200000 200000 No Yes(auto) Rstp
Role Status LAG
----- ------- ------
Desg Fwd N/A
Desg Fwd N/A
Desg Fwd N/A
Switch(config)#end
Switch#copy running-config startup-config
To Next Page
Loading...
