TP-Link T2600G Series User Manual

Configuring LLDP Viewing LLDP Settings
User Guide
463
■ Viewing the Neighbor Info
Choose the menu L2 FEATURES > LLDP > LLDP Config > Neighbor Info to load the
following page.
Figure 4-2 Neighbor Info
Follow these steps to view the neighbor information:
1) In the Auto Refresh section, enable the Auto Refresh feature and set the Refresh Rate
according to your needs. Click Apply.
2) In the Neighbor Info section, select the desired port and view its associated neighbor
device information.
System Name Displays the system name of the neighbor device.
Chassis ID Displays the Chassis ID of the neighbor device.
System
Description
Displays the system description of the neighbor device.
Neighbor Port Displays the port ID of the neighbor device which is connected to the local port.
Information Click to view the details of the neighbor device.

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing