TP-Link T2600G Series User Manual

Configuring LLDP Viewing LLDP-MED Settings
User Guide
467
Application
Type
Displays the supported applications of the local device.
Unknown Policy
Flag
Displays the unknown location settings included in the network policy TLV.
VLAN tagged Displays the VLAN Tag type of the applications, tagged or untagged.
Media Policy
VLAN ID
Displays the 802.1Q VLAN ID of the port.
Media Policy
Layer 2 Priority
Displays the Layer 2 priority used in the specific application.
Media Policy
DSCP
Displays the DSCP value used in the specific application.
■ Viewing the Neighbor Info
Choose the menu L2 FEATURES > LLDP > LLDP-MED Config > Neighbor Info to load the
following page.
Figure 5-2 LLDP-MED Neighbor Info
Follow these steps to view LLDP-MED neighgbor information:
1) In the Auto Refresh section, enable the Auto Refresh feature and set the Refresh Rate
according to your needs. Click Apply.
2) In the Neighbor Info section, select the desired port and view the LLDP-MED settings.
Device Type Displays the LLDP-MED device type of the neighbor device.
Application
Type
Displays the application type of the neighbor device.

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing