EasyManua.ls Logo

TP-Link T2600G Series - Page 548

TP-Link T2600G Series
1136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configuring Layer 3 Interfaces Configuration Example
User Guide
519
Switch(config)#vlan 2
Switch(config-vlan)#exit
Switch(config)#interface gigabitEthernet 1/0/2
Switch(config-if)#switchport general allowed vlan 2 untagged
Switch(config-if)#exit
2) Create VLAN interface 2 for VLAN 2. Configure the IP address of VLAN interface 2 as
192.168.2.1.
Switch(config)#interface vlan 2
Switch(config-if)#ip address 192.168.2.1 255.255.255.0
Switch(config-if)#end
Switch#copy running-config startup-config
Verify the VLAN Interface Configurations
Verify the configurations of VLAN interface 2.
Switch#show interface vlan 2
VLAN2 is down, line protocol is down
Hardware is CPU Interface, address is 00:0a:eb:13:a2:98
ip is 192.168.2.1/24

Table of Contents

Related product manuals