TP-Link T2600G Series User Manual

User Guide 552
Configuring DHCP Service DHCP Server Configuration
Step 3 Bind an IP address to a client:
address
ip-address client-identifier client-id
Bind the specified IP address to the client with a specific hexadecimal client ID.
ip-address: Specify the IP address to be bound.
client-id: Specify the client ID in hexadecimal format.
address
ip-address client-identifier client-id ascii
Bind the specified IP address to the client with a specific ASCII client ID.
ip-address: Specify the IP address to be bound.
client-id: Specify the client ID with ASCII characters.
address
ip-address hardware-address hardware-address hardware-type { ethernet |
ieee802 }
Bind the specified IP address to the client with a specific MAC address.
ip-address: Specify the IP address to be bound.
hardware-address: Enter the MAC address of the client.
ethernet | ieee802
: Specify a hardware type for the client, either Ethernet or IEEE802.
Step 4 show ip dhcp server manual-binding
Verify the manual binding configuration.
Step 5 end
Return to Privileged EXEC Mode.
Step 6 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to bind the IP address 192.168.1.33 in pool1 (on the
subnet of 192.168.1.0) to the host with the MAC address 74:D4:68:22:3F:34:
Switch#configure
Switch(config)#ip dhcp server pool pool1
Switch(dhcp-config)#address 192.168.1.33 hardware-address 74:d4:68:22:3f:34
hardware-type ethernet
Switch(dhcp-config)#show ip dhcp server manual-binding
Pool Name Client Id/Hardware Address IP Address Hardware Type Bind Mode
------- ------------------- --------- ----------- --------
pool1 74:d4:68:22:3f:34 192.168.1.33 Ethernet MAC Address
Switch(dhcp-config)#end
Switch#copy running-config startup-config

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing