TP-Link T2600G Series User Manual

User Guide 602
Configuring DHCP Service Appendix: Default Parameters
Parameter Default Setting
Manual Binding
Pool Name None
IP Address None
Binding Mode Client ID
Client Id None
Hardware Address None
Hardware Type Ethernet
Default settings of DHCP Relay are listed in the following table.
Table 6-2 Default Settings of DHCP Relay
Parameter Default Setting
DHCP Relay
DHCP Relay Disabled
DHCP Relay Hops 4
DHCP Relay Time Threshold 0
Option 82 Configuration
Option 82 Support Disabled
Option 82 Policy Keep
Format Normal
Circuit ID Customization Disabled
Circuit ID None
Remote ID Customization Disabled
Remote ID None
DHCP Interface Relay
Interface ID None
Server Address None

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing