TP-Link T2600G Series User Manual

Configuring QoS QoS
User Guide
621
can deteriorate a lot because of packet loss and delay. To ensure the high voice quality,
you can configure Voice VLAN or Auto VoIP.
These two features can be enabled on the ports that transmit voice traffic only or transmit
both voice traffic and data traffic. Voice VLAN can change the voice packets’ 802.1p
priority and transmit the packets in desired VLAN. Auto VoIP can inform the voice devices
of send the packets with specific configuration by working with the LLDP-MED feature.

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing