User Guide 688
Configuring QoS Configuration Examples
DSCP to 802.1P 5 5 5 5 5 5 5 7
---- ---- ---- ---- ---- ---- ---- ---
Verify the configuration of LLDP-MED:
Switch_A(config)#show lldp interface
LLDP interface config:
gigabitEthernet 1/0/1:
Admin Status: TxRx
SNMP Trap: Disabled
TLV Status
--- ------
Port-Description Yes
System-Capability Yes
System-Description Yes
System-Name Yes
Management-Address Yes
Port-VLAN-ID Yes
Protocol-VLAN-ID Yes
VLAN-Name Yes
Link-Aggregation Yes
MAC-Physic Yes
Max-Frame-Size Yes
Power Yes
LLDP-MED Status: Enabled
TLV Status
--- ------
Network Policy Yes
Location Identification Yes
To Next Page
Loading...
