TP-Link T2600G Series User Manual

Configuring AAA AAA Configuration
User Guide
723
Accounting Port Specify the UDP destination port on the RADIUS server for accounting requests.
The default setting is 1813. Usually, it is used in the 802.1x feature.
Retransmit Specify the number of times a request is resent to the server if the server does
not respond. The default setting is 2.
Timeout Specify the time interval that the switch waits for the server to reply before
resending. The default setting is 5 seconds.
NAS Identifier Specify the name of the NAS (Network Access Server) to be contained in RADIUS
packets for identification. It ranges from 1 to 31 characters. The default value is
the MAC address of the switch. Generally, the NAS indicates the switch itself.
2) Click Create to add the RADIUS server on the switch.
■ Adding TACACS+ Server
Choose the menu SECURITY > AAA > TACACS+ Config and click
to load the
following page.
Figure 2-2 TACACS+ Server Configuration
Follow these steps to add a TACACS+ server:
1) Configure the following parameters.
Server IP Enter the IP address of the server running the TACACS+ secure protocol.
Timeout Specify the time interval that the switch waits for the server to reply before
resending. The default setting is 5 seconds.
Shared Key Enter the shared key between the TACACS+ server and the switch. The
TACACS+ server and the switch use the key string to encrypt passwords and
exchange responses.
Server Port Specify the TCP port used on the TACACS+ server for AAA. The default setting is
49.
2) Click Create to add the TACACS+ server on the switch.

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing