TP-Link T2600G Series User Manual

Managing System System Tools Configurations
User Guide
53
Step 3 boot autoinstall auto-save
Enable the auto save mode and the switch will save the configuration file downloaded as
startup configuration file automatically.
Step 4 boot autoinstall auto-reboot
Enable the auto reboot mode and the switch will reboot automatically after the auto install
process is completed successfully.
Step 5 boot autoinstall retry-count
count
Specify the auto install retry count which ranges from 1 to 3. The default value is 1.
Step 6 boot autoinstall start
Start the Auto Install process and the switch will download the configuration file and the
backup image automatically.
Step 7 end
Return to privileged EXEC mode.
Step 8 copy running-config startup-config
Save the settings in the configuration file.
Note:
•
The switch will obtain a new IP address from the DHCP server during the process of Auto
Install. If you want to access to the switch, you should check the new IP address on the DHCP
server.
•
If the Auto Install process fails, the switch will restart the process every 10 minutes. You can
stop the process manually.
The following example shows how to congure the Auto Install function.
Switch#congure
Switch(cong)#boot autoinstall persistent-mode
Switch(cong)#boot autoinstall auto-save
Switch(cong)#boot autoinstall auto-reboot
Switch(cong)#boot autoinstall retry-count 2
Switch(cong)#show boot autoinstall
Auto Insatll Mode.................................Stop
Auto Insatll Persistent Mode...........Enabled
Auto Save Mode...................................Enabled
Auto Reboot Mode..............................Enabled
Auto Insatll Retry Count....................2

TP-Link T2600G Series Specifications

General

Model	T2600G Series
Layer	Layer 2+
Type	Managed
Uplink Ports	4 x Gigabit SFP slots
VLAN	4K VLANs
QoS	8 priority queues
Management	Web-based GUI, CLI, SNMP, RMON
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Interface	RJ45
L2 Features	STP, RSTP, MSTP, LACP, IGMP Snooping
L3 Features	Static Routing
Security	802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table	16K
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% non-condensing